{"id":244,"date":"2008-04-26T14:04:30","date_gmt":"2008-04-26T10:04:30","guid":{"rendered":"http:\/\/mudji.net\/press\/?p=244"},"modified":"2021-06-11T21:57:06","modified_gmt":"2021-06-11T17:57:06","slug":"desain-dan-konfigurasi-voip-dan-data-pada-jaringan-frame-relay","status":"publish","type":"post","link":"https:\/\/mudji.net\/press\/?p=244","title":{"rendered":"Desain dan konfigurasi VoIP dan Data pada Jaringan Frame Relay"},"content":{"rendered":"

Desain dan konfigurasi VoIP dapat dibuat dalam berbagai skenario, bergantung pada perangkat apa yang akan kita gunakan. Berikut contoh konfigurasi VoIP dan Data melalui Jaringan Frame Relay point-to-point menggunakan Cisco Router.<\/p>\n

\"konfigurasi<\/a><\/p>\n

Untuk desain jaringan VoIP, di dalam perangkat Cisco router A dan B harus dirancang sebaik mungkin Alamat IP, subnet mask, serta nomor extension pesawat telepon. Seperti tabel di bawah ini:<\/p>\n

Site A<\/strong><\/p>\n

Router A:<\/strong>
\nNetwork IP LAN 172.21.1.0
\nSubnet Mask 255.255.255.0
\nAlamat IP WAN 10.1.1.5
\nSubnet Mask 255.255.255.252<\/p>\n

PC-A<\/strong>
\nAlamat IP 172.21.1.2
\nSubnet Mask 255.255.255.0
\nDefault Gateway 172.21.1.1<\/p><\/blockquote>\n

Site B<\/strong><\/p>\n

Router B<\/strong>
\nNetwork IP LAN 192.168.1.0
\nSubnet Mask 255.255.255.0
\nAlamat IP WAN 10.1.1.6
\nSubnet Mask 255.255.255.252<\/p>\n

PC-B<\/strong>
\nAlamat IP 192.168.1.2
\nSubnet Mask 255.255.255.0
\nDefault Gateway 192.168.1.1<\/p><\/blockquote>\n

Penomoran Extension Pesawat Telepon<\/strong><\/p>\n

Site A<\/strong>
\nVoice-Port 2\/0 100<\/p>\n

Site B<\/strong>
\nVoice-Port 2\/0 101<\/p><\/blockquote>\n

Port voice dalam router berperan melakukan emulasi koneksi telephony fisikal sehingga panggilan-panggilan voice beserta signaling dapat terkirim ke tujuan melalui jaringan. Agar komunikasi dapat berjalan dengan baik, hardware voice yang terpasang di perangkat router harus tepat, serta mengkonfigurasi port yang terhubung ke perangkat-perangkat telephony(handset, PABX, dll). Dengan demikian, perangkat dapat saling mengerti beberapa informasi signaling yang diterima dari jaringan Frame Relay. Berikut ilustrasi contoh instalasi port voice:<\/p>\n

Sebuah port voice menghubungkan pesawat telepon ke WAN (Wide Area Network) melewati router.<\/p>\n

\"Sebuah<\/a><\/p>\n

Dua telepon dikoneksikan melewati WAN untuk memberikan toll bypass<\/p>\n

\"Dua<\/a><\/p>\n

Sebelum mengonfigurasi VoIP pada Cisco router, terlebih dahulu mengetahui gambaran urutan panggilan VoIP. Berikut ini merupakan urutan panggilan VoIP:<\/p>\n

    \n
  1. Pemanggil mengangkat handset, memberi isyarat kondisi off-hook ke layer aplikasi signaling VoIP.<\/li>\n
  2. Sesi layer aplikasi VoIP membuka nada dial (dial tone) dan menunggu pemanggil untuk melakukan dialing ke tujuan.<\/li>\n
  3. Saat pemanggil melakukan dialing sebuah nomor, digit dial diakumulasi dan disimpan oleh aplikasi session.<\/li>\n
  4. Setelah digit tertentu terakumulasi sehingga sesuai dengan pola address tujuan, nomor telepon tersebut dipetakan ke sebuah IP host. IP host tersebut memiliki hubungan koneksi langsung ke nomor telepon tujuan.<\/li>\n
  5. Aplikasi session selanjutnya membentuk transmisi dan channel penerimaan untuk masing-masing arah jaringan IP.<\/li>\n
  6. Coder-decoder (codec) diaktifkan untuk kedua ujung koneksi, dan percakapan diproses menggunakan RTP\/UDP\/IP. Berbagai sinyal voice dikompres, dipaketkan ke bentuk paket-paket, lalu ditransportasikan melalui jaringan.<\/li>\n
  7. Signaling yang dapat dideteksi oleh port voice setelah setup panggilan lengkap, kemudian dibawa melalui jaringan IP.<\/li>\n<\/ol>\n

    Dalam suatu jaringan Private atau jaringan perusahaan, direkomendasikan menggunakan IP Private, agar tidak konflik di kemudian hari apabila jaringan ini diintegrasikan dengan Internet Public. Kelompok IP private adalah sebagai berikut:<\/p>\n

    Kelas A 10.0.0.0-10.255.255.255
    \nKelas B 172.16.0.0-172.31.255.255
    \nKelas C 192.168.0.0-192.168.255.255<\/p><\/blockquote>\n

    Banyak type router Cisco yang bisa digunakan untuk VoIP dengan syarat mempunyai minimum fitur IOS IP Plus dan port Voice, baik fixed maupun modular. Type router cisco yang memiliki port voice modular antara lain seri 1700, 2600, 3600, dst.
    \nDalam desain ini digunakan 2 buah tipe router Cisco seri 1700 type 1760.<\/p>\n

    \"Gambar<\/a><\/p>\n

    Gambar fisik router Cisco seri 1760<\/p>\n

    \"Diagram<\/a><\/p>\n

    Diagram router Cisco seri 1760<\/p>\n

    Konfigurasi <\/span>VoIP <\/span>pada Cisco Router<\/span><\/h3>\n

    Konfigurasi router<\/span> Cisco seri 1760 dapat dilakukan dengan menggunakan command-line<\/span>, yang dihubungkan ke dalam port console<\/span>. Berikut merupakan beberapa perintah esensial untuk melakukan konfigurasi awal terhadap router <\/span>yang digunakan sebagai infrastruktur jaringan VoIP<\/span>:<\/span><\/p>\n

    \n

    1. <\/span>Konfigurasi nama host<\/span> router<\/span>, dengan menggunakan perintah:<\/span><\/p>\n\n\n\n
    \n

    router(config)<\/span><\/tt>#hostname<\/span> <text><\/span><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    2. <\/span>Konfigurasi password<\/span> demi alasan keamanan, dengan menggunakan perintah:<\/span><\/p>\n\n\n\n
    \n

    router(config)<\/span><\/tt>#enable<\/span> password<\/span> <text><\/span><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    \n

    3. <\/span>Setting Frame Relay pada Interface Serial 0\/0<\/span><\/p>\n\n\n\n
    \n

    routerA(config)<\/span><\/tt>#int<\/span> s0\/0<\/span><\/span><\/tt><\/p>\n

    routerA(config-if)<\/span><\/tt>#encapsulation<\/span> Frame Relay<\/span><\/span><\/tt><\/p>\n

    routerA(config-if)<\/span><\/tt>#exit<\/span><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    4. <\/span>Setting alamat IP pada Sub-Interface Serial 0\/0.20<\/span> dan voice compression<\/p>\n\n\n\n
    \n

    routerA(config)<\/span><\/tt>#int<\/span> s0\/0.20<\/span> point-to-point<\/span><\/span><\/tt><\/p>\n

    routerA(config-subif)<\/span><\/tt>#Description<\/span> Link-For-Voip<\/span><\/span><\/tt><\/p>\n

    routerA(config-subif)<\/span><\/tt>#ip<\/span> address<\/span> 10.1.1.5 255.255.255.252<\/span><\/span><\/tt><\/p>\n

    RouterA(config-subif)# frame-relay ip rtp header-compression<\/span><\/strong><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    5. <\/span>Setting DLCI pada Sub-Interface Serial 0\/0.20<\/span><\/p>\n\n\n\n
    \n

    routerA(config-subif)<\/span><\/tt>#Frame-Relay<\/span> Interface-DLCI<\/span> 20<\/span><\/strong><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    6. <\/span>Setting Alamat IP pada FastEthernet 0\/0<\/span><\/p>\n\n\n\n
    \n

    routerA(config)<\/span><\/tt>#int<\/span> f0\/0<\/span><\/span><\/tt><\/p>\n

    routerA(config-if)<\/span><\/tt>#ip<\/span> address<\/span> 172.21.1.1 255.255.255.0<\/span><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    7. <\/span>Setting untuk membuka port Telnet <\/span><\/p>\n\n\n\n
    \n

    routerA(config)<\/span><\/tt>#config<\/span> t<\/span><\/span><\/tt><\/p>\n

    routerA(config-line)<\/span><\/tt>#line<\/span> vty<\/span> 0 4<\/span><\/strong><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    8. <\/span>Setting Password untuk Telnet<\/span><\/p>\n\n\n\n
    \n

    routerA(config-line)<\/span><\/tt>#password<\/span> cisco<\/span> routerA(config-line)<\/span>#login<\/span> routerA(config-line)<\/span>#(press Ctrl+Z<\/span>)<\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    9. <\/span>Menyimpan konfigurasi ke dalam memori NVRAM (non-volatile random access memory<\/span>):<\/span><\/p>\n\n\n\n
    \n

    routerA<\/span><\/tt>#write<\/span><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    10. <\/span>Konfigurasi routing stati<\/span>k<\/p>\n\n\n\n
    \n

    routerA(config)<\/span><\/tt>#ip<\/span> route<\/span> 192.168.1.0<\/span> 255.255.255.0<\/span> Serial0\/0.20<\/span><\/strong><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    11. <\/span>Konfigurasi Plain-Old Telephone System (POTS) dan Nomor Extension terminal telepon<\/span> yang terkoneksi pada routerA.<\/p>\n\n\n\n
    \n

    routerA(config)<\/span><\/tt>#dial-peer<\/span> voice<\/span> 1<\/span> POTS<\/span><\/span><\/tt><\/p>\n

    routerA(config-dial-peer)<\/span><\/tt>#destination<\/span> pattern<\/span> 100<\/span><\/span><\/tt><\/p>\n

    routerA(config-dial-peer)<\/span><\/tt>#port<\/span> 2\/0<\/span><\/span><\/tt><\/p>\n

    routerA(config-dial-peer)<\/span><\/tt>#description<\/span> EXT-TELEPON<\/span><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    12. <\/span>Setting Routing VoIP<\/span><\/p>\n\n\n\n
    \n

    routerA(config)<\/span><\/tt>#dial-peer<\/span> voice<\/span> 2<\/span> VoIP<\/span><\/span><\/tt><\/p>\n

    routerA(config-dial-peer)<\/span><\/tt>#destination<\/span> pattern<\/span> 101<\/span><\/span><\/tt><\/p>\n

    routerA(config-dial-peer)<\/span><\/tt>#session<\/span> target<\/span> ipv4:10.1.1.6<\/span><\/span><\/tt><\/p>\n

    routerA(config-dial-peer)<\/span><\/tt>#description<\/span> ROUTING-VoIP<\/span><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    13. <\/span>Setting IP Host Table<\/span><\/p>\n\n\n\n
    \n

    routerA(config)<\/span><\/tt>#ip<\/span> host<\/span> RouterB<\/span> 10.1.1.6<\/span><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    \n

    .<\/p>\n

    Konfigurasi dibawah ini merupakan konfigurasi lengkap VoIP dan data melalui jaringan Frame Relay<\/em>:<\/span><\/p>\n

    Konfigurasi Router A<\/strong><\/p><\/blockquote>\n

    Router#configure terminal
    \nRouter(config)#hostname RouterA
    \nRouterA(config)#enable password cisco
    \nRouterA(config)#ip host RouterB 10.1.1.6<\/p>\n

    RouterA(config)#interface Fastethernet 0\/0
    \nRouterA(config-if)#ip address 172.21.1.1 255.255.255.0
    \nRouterA(config-if)#description LAN-A
    \nRouterA(config-if)#exit<\/p>\n

    RouterA(config)#interface serial 0\/0
    \nRouterA(config-if)#encapsulation Frame-Relay
    \nRouterA(config-if)#exit<\/p>\n

    RouterA(config)#interface serial 0\/0.20 point-to-point
    \nRouterA(config-subif)#description link-for-VoIP+Data
    \nRouterA(config-subif)#ip address 10.1.1.5 255.255.255.252
    \nRouterA(config-subif)#frame relay interface-dlci 20
    \nRouterA(config-subif)#frame-relay ip rtp header-compression
    \nRouterA(config-subif)#Ctrl Z<\/p>\n

    RouterA#configure terminal
    \nRouterA(config)#line vty 0 4
    \nRouterA(config-line)#password cisco
    \nRouterA(config-line)#login
    \nRouterA(config-line)#Ctrl Z<\/p>\n

    RouterA#configure terminal
    \nRouterA(config)#dial-peer voice 1 POTS
    \nRouterA(config-dial-peer)#destination pattern 100
    \nRouterA(config-dial-peer)#port 2\/0
    \nRouterA(config-dial-peer)#description EXT-TELPON
    \nRouterA(config-dial-peer)#exit<\/p>\n

    RouterA(config)#dial-peer voice 2 VoIP
    \nRouterA(config-dial-peer)#destination pattern 101
    \nRouterA(config-dial-peer)#session target ipv4 : 10.1.1.6
    \nRouterA(config-dial-peer)#description ROUTING-VoIP
    \nRouterA(config-dial-peer)#exit<\/p>\n

    RouterA(config)#ip route 192.168.1.0 255.255.255.0 Serial0\/0.20
    \nRouterA#write<\/p>\n


    \nKonfigurasi RouterB<\/strong><\/p><\/blockquote>\n

    Router#configure terminal
    \nRouter(config)#hostname RouterB
    \nRouterB(config)#enable password cisco
    \nRouterB(config)#frame-relay switching
    \nRouterB(config)#ip host RouterA 10.1.1.5<\/p>\n

    RouterB(config)#interface Fastethernet 0\/0
    \nRouterB(config-if)#ip address 192.168.1.1 255.255.255.0
    \nRouterB(config-if)#description LAN-B
    \nRouterB(config-if)#exit<\/p>\n

    RouterB(config)#interface serial 0\/0
    \nRouterB(config-if)#clock rate 512000
    \nRouterB(config-if)#encapsulation Frame-Relay
    \nRouterB(config-if)#frame relay intf-type DCE
    \nRouterB(config-if)#exit<\/p>\n

    RouterB(config)#interface serial 0\/0.20 point-to-point
    \nRouterB(config-subif)#description link-for-VoIP+Data
    \nRouterB(config-subif)#ip address 10.1.1.6 255.255.255.252
    \nRouterB(config-subif)#frame-relay interface-dlci 20
    \nRouterB(config-subif)#frame-relay ip rtp header-compression
    \nRouterB(config-subif)#exit<\/p>\n

    RouterB(config)#dial-peer voice 1 POTS
    \nRouterB(config-dial-peer)#destination pattern 101
    \nRouterB(config-dial-peer)#port 2\/0
    \nRouterB(config-dial-peer)#description EXT-TELPON
    \nRouterB(config-dial-peer)#exit<\/p>\n

    RouterB(config)#dial-peer voice 2 VoIP
    \nRouterB(config-dial-peer)#destination pattern 100
    \nRouterB(config-dial-peer)#session target ipv4 : 10.1.1.5
    \nRouterB(config-dial-peer)#description ROUTING-VoIP
    \nRouterB(config-dial-peer)#exit<\/p>\n

    RouterB(config)#ip route 172.21.1.0 255.255.255.0 Serial0\/0.20<\/p>\n

    RouterB(config)#line vty 0 4
    \nRouterB(config-line)#password cisco
    \nRouterB(config-line)#login
    \nRouterB(config-line)#Ctrl Z
    \nRouterB#write<\/p><\/blockquote>\n

    <\/h4>\n

    \u00a0<\/span><\/h4>\n

    \n

    .<\/p>\n

    Untuk melihat hasil konfigurasi diatas, menggunakan perintah <\/span>Show Running-configuration<\/span> pada router cisco.<\/span><\/p>\n\n\n\n
    \n

    RouterA<\/span><\/tt>#show<\/span> running<\/span>-config<\/span><\/span><\/tt><\/p>\n

    RouterB<\/span><\/tt>#show<\/span> running<\/span>-config<\/span><\/span><\/tt><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    \n

    \n

    .<\/p>\n

    Berikut Hasil <\/span>Show Running-Configuration<\/span> pada RouterA dan RouterB<\/span><\/p>\n\n\n\n\n\n
    \n

    Router A<\/span><\/p>\n<\/td>\n

    		\n

    Router B<\/span><\/p>\n<\/td>\n<\/tr>\n<\/thead>\n

    \n

    hostname RouterA<\/span><\/p>\n

    !<\/span><\/p>\n

    enable password cisco<\/span><\/p>\n

    !<\/span><\/p>\n

    ip host RouterB 10.1.1.6<\/span><\/p>\n

    !<\/span><\/p>\n

    interface FastEthernet0\/0<\/span><\/p>\n

    ip address 172.21.1.1 255.255.255.0<\/span><\/p>\n

    speed auto<\/span><\/p>\n

    !<\/span><\/p>\n

    interface Serial0\/0<\/span><\/p>\n

    encapsulation frame-relay<\/span><\/p>\n

    !<\/span><\/p>\n

    interface Serial0\/0.20 point-to-point<\/span><\/p>\n

    description link-for-voip-data<\/span><\/p>\n

    ip address 10.1.1.5 255.255.255.252<\/span><\/p>\n

    frame-relay interface-dlci 20 <\/span><\/p>\n

    frame-relay ip rtp header-compression<\/span><\/p>\n

    !<\/span><\/p>\n

    ip classless<\/span><\/p>\n

    ip route 192.168.1.0 255.255.255.0 Serial0\/0.20<\/span><\/p>\n

    !<\/span><\/p>\n

    voice-port 2\/0<\/span><\/p>\n

    !<\/span><\/p>\n

    voice-port 2\/1<\/span><\/p>\n

    !<\/span><\/p>\n

    dial-peer voice 1 pots<\/span><\/p>\n

    description EXT-TELPON<\/span><\/p>\n

    destination-pattern 100<\/span><\/p>\n

    port 2\/0<\/span><\/p>\n

    !<\/span><\/p>\n

    dial-peer voice 2 voip<\/span><\/p>\n

    description ROUTING-VOIP<\/span><\/p>\n

    destination-pattern 101<\/span><\/p>\n

    session target ipv4:10.1.1.6<\/span><\/p>\n

    !<\/span><\/p>\n

    line con 0<\/span><\/p>\n

    line aux 0<\/span><\/p>\n

    line vty 0 4<\/span><\/p>\n

    password cisco<\/span><\/p>\n

    login<\/span><\/p>\n

    !<\/span><\/p>\n

    End<\/span><\/p>\n<\/td>\n

    		\n

    hostname RouterB<\/span><\/p>\n

    !<\/span><\/p>\n

    enable password cisco<\/span><\/p>\n

    !<\/span><\/p>\n

    ip host RouterA 10.1.1.5<\/span><\/p>\n

    frame-relay switching<\/span><\/p>\n

    !<\/span><\/p>\n

    interface FastEthernet0\/0<\/span><\/p>\n

    ip address 192.168.1.1 255.255.255.0<\/span><\/p>\n

    speed auto<\/span><\/p>\n

    !<\/span><\/p>\n

    interface Serial0\/0<\/span><\/p>\n

    encapsulation frame-relay<\/span><\/p>\n

    clock rate 512000<\/span><\/p>\n

    frame-relay intf-type dce<\/span><\/p>\n

    !<\/span><\/p>\n

    interface Serial0\/0.20 point-to-point<\/span><\/p>\n

    description link-for-voip-data<\/span><\/p>\n

    ip address 10.1.1.6 255.255.255.252<\/span><\/p>\n

    frame-relay interface-dlci 20 <\/span><\/p>\n

    frame-relay ip rtp header-compression<\/span><\/p>\n

    !<\/span><\/p>\n

    ip classless<\/span><\/p>\n

    ip route 172.21.1.0 255.255.255.0 Serial0\/0.20<\/span><\/p>\n

    !<\/span><\/p>\n

    voice-port 2\/0<\/span><\/p>\n

    !<\/span><\/p>\n

    voice-port 2\/1<\/span><\/p>\n

    !<\/span><\/p>\n

    dial-peer voice 1 pots<\/span><\/p>\n

    description EXT-TELPON<\/span><\/p>\n

    destination-pattern 101<\/span><\/p>\n

    port 2\/0<\/span><\/p>\n

    !<\/span><\/p>\n

    dial-peer voice 2 voip<\/span><\/p>\n

    description ROUTING-VOIP<\/span><\/p>\n

    destination-pattern 100<\/span><\/p>\n

    session target ipv4:10.1.1.5<\/span><\/p>\n

    !<\/span><\/p>\n

    line con 0<\/span><\/p>\n

    line aux 0<\/span><\/p>\n

    line vty 0 4<\/span><\/p>\n

    password cisco<\/span><\/p>\n

    login<\/span><\/p>\n

    !<\/span><\/p>\n

    end<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    \n","protected":false},"excerpt":{"rendered":"

    Desain dan konfigurasi VoIP dapat dibuat dalam berbagai skenario, bergantung pada perangkat apa yang akan kita gunakan. Berikut contoh konfigurasi VoIP dan Data melalui Jaringan Frame Relay point-to-point menggunakan Cisco …<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[1],"tags":[],"jetpack_featured_media_url":"","_links":{"self":[{"href":"https:\/\/mudji.net\/press\/index.php?rest_route=\/wp\/v2\/posts\/244"}],"collection":[{"href":"https:\/\/mudji.net\/press\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mudji.net\/press\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mudji.net\/press\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mudji.net\/press\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=244"}],"version-history":[{"count":2,"href":"https:\/\/mudji.net\/press\/index.php?rest_route=\/wp\/v2\/posts\/244\/revisions"}],"predecessor-version":[{"id":395,"href":"https:\/\/mudji.net\/press\/index.php?rest_route=\/wp\/v2\/posts\/244\/revisions\/395"}],"wp:attachment":[{"href":"https:\/\/mudji.net\/press\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=244"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mudji.net\/press\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=244"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mudji.net\/press\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=244"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}